How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a distinct set of steps to add the second key. It requires dealer assistance using a handheld computer dubbed Tech-2. Then the transponder must be replaced and a key need to be purchased.
Rotate your keys to stop one from wearing out faster than the other. This will also help to keep your keys in top condition.
Replacement Case
In contrast to the traditional Saab keys of old keys, the new key fobs are equipped with electronics which makes it hard to copy. This has made stealing car keys much more difficult than twenty years ago. However, it has made replacing lost keys a more expensive task.
Saab 9-3 owners must have two working keys. It is expensive to replace a lost key as it requires replacing the CIM module, as well as reprogramming the locking cylinders. Dealers typically charge between $100 and $200 to complete this.
There are ways to reduce the high cost. Certain parts suppliers will utilize the code of an extra key to cut a brand new metal blade at a fraction that of a dealer. The key must be exactly the same as the original for it to function in your vehicle.
You can also replace the case yourself by following these steps. You will need to have an open-faced screwdriver and a lot of patience. With the screwdriver slowly break the plastic and separate the emergency key from the case. When the case is opened take out all electronic components and place them into your new case. Make sure you put the correct badge and key back in the case too.
Replacement Battery
The replacement battery for the Saab 9-3 is a low-cost component that can be replaced easily and quickly. This YouTube DIY video user Cyclone Cyd explains how to replace the remote key fob battery in only four steps. This tutorial is suitable for any modern saab key fob however the procedure might differ slightly.
This button is usually placed just below the Saab logo on the back of the fob. This button is typically located on the back of the fob close to the Saab Logo. Then, use the flathead screwdriver to insert into the small hole of this button. This should be sufficient to let the fob case open so that you can replace the battery.
After the new battery CR1632 is in place, you can reassemble the remote key fob. You can then program it to your car. The entire process should take no more than an hour at most. This is a straightforward procedure that doesn't require special tools.
If you lose a key, the process is more complicated but it is still able to be completed. The dealer needs to first determine the VIN of the vehicle and then order a replacement TWICE module and key blade that is matched to the unique code. After that, they will be required to cut the replacement key and then program it using an innovative software tool called MDI.
Key Replacement Fob
The key fob has a battery that is used to lock and unlock your vehicle. Batteries have a finite lifespan and will eventually die. It's a common issue in all vehicles. The good news is that you can change the batteries in most key fobs, and not have to replace the entire case. You can buy replacement fobs on Amazon that come with all the electronics already installed, so you can simply open the case and replace the batteries in the original case. It is important to remember that you will need to take out the emergency key first, and you can accomplish this by inserting the screwdriver of a small flathead into the slot in the middle of the case. The case should split when you turn the screwdriver around it.
If you're planning to replace your keys, have a spare available. This can save you a lot of money. If you have spare keys, you can request that the dealer cut a new key and program it to the car, which is much cheaper than replacing the entire key fob.
If saab keys replacement do not have a spare key one, you can add another key to your car, however it requires a lot of research and effort. Adding a second key costs about a few hundred dollars and also requires programming of the car's computer. This can be done by a professional, however it is an expensive option for the majority of owners.
Replacement Ignition
Contrary to the earlier Saab cars, the modern SAAB 9-3 models use an upgraded alarm system that is dependent on a coded keys. This means that should you lose only one functioning key, getting another key can be extremely expensive because the car needs to have a computer module installed, and it must also be programmed to accept a new key. Even a dealer can charge hundreds of dollars to program an entirely new key, even if they're unable to complete the task.
Dealers will charge you the highest price to replace your car computer (also known as the CIM or SAAB twice) if you lose the only working key. Instead we can reprogramme the EEPROM in your current car computer, preparing it for a replacement key, which will save you more than 50% of what you'll have to pay at a dealership.
If you've been a faithful owner of a 03-11 SAAB 9-3, then you probably are aware that the ignition key isn't all that robust. They can become incredibly sticky, and the buttons are known to fall off of them every now and then and you should think about getting a replacement if yours isn't performing as it should. Luckily, replacing the ignition key isn't as difficult as it sounds, and it can be done fairly quickly using the proper tools.